판넬 컨트롤 포텐셔미터
| 동양전기공업의 제품을 소개합니다.
다른이미지보기
제품 상세 정보 (Product Features)
■ 16mm diameter, single-turn industrial panel controls Cermet film element
■ Single unit, single shaft
■ Excellent environmental characteristics
■ Wide temperature range of55C to125C
■ Metal shaft and bushing
■ Linear taper Shaft lock available
■ Panel and PCB mounting styles
■ Lug or right angle mount pin terminals
■ 3.2mm diameter shafts in slot, flat or round end styles
■ Standard 10mm or 15mm shaft length
"추가제품옵션"을 통해서 "샘플&견적요청"가능합니다.
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
■ Single unit, single shaft
■ Excellent environmental characteristics
■ Wide temperature range of55C to125C
■ Metal shaft and bushing
■ Linear taper Shaft lock available
■ Panel and PCB mounting styles
■ Lug or right angle mount pin terminals
■ 3.2mm diameter shafts in slot, flat or round end styles
■ Standard 10mm or 15mm shaft length
"추가제품옵션"을 통해서 "샘플&견적요청"가능합니다.
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
핵심 정보 (Key information)
저항 | 100Ω~ 1MΩ(B) |
---|---|
턴 수 | 260º ±10º |
Power Rating | 1.0W at +70ºC |
Power Rating | 0W at + 120ºC |
Technical Data
Element Type | Wirewound |
---|---|
Resistance Range | 100Ω-1MΩ (B) |
Resistance Taper | B = Linear |
Resistance Tolerance | ±10% Standard |
Power Rating | 1.0W at70C |
Power Rating | 0W at120C |
Adjustment Travel | 260º ±10º |
Temperature Range | -10ºC to125ºC |
Rotational Life | 15,000 Cycles |
Construction | Metal Bushing, Metal Shaft |
Nominal Body Size | 20mm diameter |
Bushing Type | M9 (P0.75), 6 or 10*mml |
Shaft Dimensions | Ø6mm15 or 20mml (FMS)** |
Shaft End Styles | Slot (S), Flat (F) or Round (R |
Terminal Styles | Rear Exit Straight Lug or PCB |
Configurations | Single Unit, Single Shaft |
Specification
- Specification
Drawing
- GF201 Dimension
- GF201L Dimension
- GFP201 Dimension