처음화면 > PRODUCTS > 센서 Sensor > 앵글/각도 센서 [Angle Sensor] > 제품상세
PRODUCTS
- New Products
- 단자대 Terminal Block
- 가변저항 (반고정 저항) Trimmer Potentiometer
- 포텐셔미터 Potentiometer
- 스위치 Switch
- 센서 Sensor
- 기계 및 지원부품 Machine&Accessory
- 터미널 Terminals
- 릴레이 Relay
- 회로보호 Circuit Protection
- 엔코더 Encoder
- Electronics & Interface
앵글/각도 센서 [Angle Sensor]
| 동양전기공업의 제품을 소개합니다.
다른이미지보기
제품 상세 정보 (Product Features)
・Conductive Plastic Angle Sensor
・Independent Linearity : ±1%
・Bushing Mount
・CP-2FB(b) : Ball Bearing
・CP-2FB(m) : Metal Sleeve Bearing
【원자재】
●하우징: 알루미늄
●샤프트: 스테인리스 강
●베어링: CP-2FB(b):스테인리스 강
CP-2FB(m):구리합금
*사용시 주의사항
・To avoid burnout of resistive element, do not supply more than 1mA current to terminal 2.
・Miswiring might cause burnout of resistive element.
・To reduce sliding noise, add load resistance should be more than 100times and less than 1000times of total resistance.
・Slight continuous vibration such as dither might cause short lifetime of the sensor.
150m/s2 2000Hz 3 axis 2 hours each
500m/s2 11ms 6 directions 3 times
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
・Independent Linearity : ±1%
・Bushing Mount
・CP-2FB(b) : Ball Bearing
・CP-2FB(m) : Metal Sleeve Bearing
【원자재】
●하우징: 알루미늄
●샤프트: 스테인리스 강
●베어링: CP-2FB(b):스테인리스 강
CP-2FB(m):구리합금
*사용시 주의사항
・To avoid burnout of resistive element, do not supply more than 1mA current to terminal 2.
・Miswiring might cause burnout of resistive element.
・To reduce sliding noise, add load resistance should be more than 100times and less than 1000times of total resistance.
・Slight continuous vibration such as dither might cause short lifetime of the sensor.
150m/s2 2000Hz 3 axis 2 hours each
500m/s2 11ms 6 directions 3 times
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
Electrical Spec
Effective Electrical Travel | 340°+2°, -3° |
---|---|
Resistance | 0.5, 1, 2, 5,kΩ |
Total Resistance Tolerance | ±20 |
Independent Linearity | ±1 |
Life Cycles | 10 Million Cycle |
Category Temperature Range | -40 ~ +100℃ |
Storage Temperature Range | -40 ~ +100℃ |
Vibration | 150m/s2 2000Hz 3 axis 2 hours |