앵글/각도 센서 [Angle Sensor]
| 동양전기공업의 제품을 소개합니다.
다른이미지보기
제품 상세 정보 (Product Features)
・Contactless Hall-IC Angle Sensor
・Absolute Linearity :±2%FS (=Independent Lin.:±1%FS)
・Bushing Mount
・Available with φ3.175mm Shaft on Request
Single Output:
CP-20H, CP-20HS, CP-20HB, CP-20HBS
Dual Output P=Parallel, C=Cross
CP-20HP, CP-20HSP, CP-20HBP, CP-20HBSP, CP-20HC, CP-20HSC, CP-20HBC, CP-20HBSC
【원자재】
●하우징: 알루미늄
●샤프트: 스테인리스 강
●베어링: 스테인리스 강
*사용시 주의사항
・To avoid burnout of resistive element, do not supply more than 1mA current to terminal 2.
・Miswiring might cause burnout of resistive element.
・To reduce sliding noise, add load resistance should be more than 100times and less than 1000times of total resistance.
・Slight continuous vibration such as dither might cause short lifetime of the sensor.
150m/s2 2000Hz 3 axis 2 hours each
500m/s2 11ms 6 directions 3 times
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
・Absolute Linearity :±2%FS (=Independent Lin.:±1%FS)
・Bushing Mount
・Available with φ3.175mm Shaft on Request
Single Output:
CP-20H, CP-20HS, CP-20HB, CP-20HBS
Dual Output P=Parallel, C=Cross
CP-20HP, CP-20HSP, CP-20HBP, CP-20HBSP, CP-20HC, CP-20HSC, CP-20HBC, CP-20HBSC
【원자재】
●하우징: 알루미늄
●샤프트: 스테인리스 강
●베어링: 스테인리스 강
*사용시 주의사항
・To avoid burnout of resistive element, do not supply more than 1mA current to terminal 2.
・Miswiring might cause burnout of resistive element.
・To reduce sliding noise, add load resistance should be more than 100times and less than 1000times of total resistance.
・Slight continuous vibration such as dither might cause short lifetime of the sensor.
150m/s2 2000Hz 3 axis 2 hours each
500m/s2 11ms 6 directions 3 times
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
Mechanical Spec
Mechanical Angle | 360 Endless |
---|---|
Torque | MAX. 2/MAX. 100(S) |
Thrust Load Tolerance | MIN. 2 |
Radial Load Tolerance | MAX. 5 |
Mass | Approx.20 |
Environmental Spec
Life Cycles | 10 Million |
---|---|
Category Temperature Range | -30 ~ +100℃ |
Storage Temperature Range | -30 ~ +100℃ |
Vibration | 200mm2/s, 5 - 500Hz, 6 minutes |
Shock | 1000mm2/s, 6ms, 3 axis, 3 time |
EMS | 100V/m 200MHz - 1GHz (ISO 1145 |
ESD (Case To Each Terminal) | MAX.±16(IEC 61000-4-2) |
ESD (Between Each Terminal) | MAX.±8(IEC 61000-4-2) |
IP Level | IP50/ IP60 (S) |
Electrical Spec
Effective Electrical Travel | Standard: ±170 (=340) |
---|---|
Output Range | 10~ 90 |
Absolute Linearity | ±2 (=Ind.Lin ±1%FS) |
Input Voltage | DC5±0.5 |
Load Resistance | MIN. 10 |
Supply Current | Single(MAX. 16)/ Dual (MAX. 32 |
Insulation Resistance | MIN. 100/DC50V |
Output Resolution | 12 (0 ~ 100%Vin) |
Hysteresis | 0.3 |
Drawing
- Drawing
- CP-20H mounting
- Output Characteristics
- Schematic