슬라이드 스위치
| 동양전기공업의 제품을 소개합니다.
다른이미지보기
제품 상세 정보 (Product Features)
*추가제품옵션탭 에서 상세한 제품군을 찾을실 수 있습니다.
-Environmental Spec
: 작동온도 범위 -40도~+80도
-솔더링 과정 중의 세척안내
1. Only Tape sealed types apply to wash process.
2. Do not remove the tape before wash process.
3. After soldering process, do not continue the wash process immediately. Please wait for at least 3 minutes.
4. Apply alcoholic solvents as cleaning agent do not use other solvents or water.
5. Ultrasonic cleaning is not recommended.
6. The cleaning process per stage is max. 1 minute and the whole cleaning time are not to exceed 3 minutes.
7. Do not impose any external force on switch while washing.
-솔더링 과정 중 플럭스(Flux)가 유입 될 경우 스위치의 오작동이 발생할 수 있습니다.
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
-Environmental Spec
: 작동온도 범위 -40도~+80도
-솔더링 과정 중의 세척안내
1. Only Tape sealed types apply to wash process.
2. Do not remove the tape before wash process.
3. After soldering process, do not continue the wash process immediately. Please wait for at least 3 minutes.
4. Apply alcoholic solvents as cleaning agent do not use other solvents or water.
5. Ultrasonic cleaning is not recommended.
6. The cleaning process per stage is max. 1 minute and the whole cleaning time are not to exceed 3 minutes.
7. Do not impose any external force on switch while washing.
-솔더링 과정 중 플럭스(Flux)가 유입 될 경우 스위치의 오작동이 발생할 수 있습니다.
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
Mechanical Spec
Mechanical Life | 20,000 cycles. |
---|---|
Operation Temperature | -40℃ ~ +80℃ |
Electrical Spec
Contact Resistance | 50 mΩ max. |
---|---|
Insulation Resistance | 1,000 MΩ min. |
Dielectric Strength | 1,000 Vrms min. At sea level. |
Drawing
- Switch Function
- SPDT Pole Options
- DPDT Pole Options
- Termination Options