딥 스위치
| 동양전기공업의 제품을 소개합니다.
다른이미지보기
제품 상세 정보 (Product Features)
*추가제품옵션탭 에서 상세한 제품군을 찾을실 수 있습니다.
원자재
△베이스: UL 94V-0 Nylon Thermoplastic
색상: 검은색
△커버: UL 94V-0 Nylon Thermoplastic
색상: 검은색
△액츄에이터:UL 94V-0 LCP Thermoplastic
색상: 흰색
△CONTACT: 구리합금
△터미널: Brass
△CONTACT PLATING:금도금한 니켈
△TERMINAL PLATING: 금도금
△테이프: KAPTON
솔더링 및 세척과정
Soldering:Vapor phase & Reflow soldering can be applied.
Cleaning:
1. Only seal tape type apply to washing process.
2. Do not remove the seal tape before washing.
3. After soldering process, do not continue the washing process immediately. Please wait for at least 3 minutes.
4. Apply alcoholic solvents as cleaning agent do not use other solvents or water.
5. Ultrasonic cleaning is unavailable.
6. The cleaning process per stage is 1 minute max and the whole cleaning times do not exceed 3 minutes.
7. Do not impose any external force on switch while washing
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
원자재
△베이스: UL 94V-0 Nylon Thermoplastic
색상: 검은색
△커버: UL 94V-0 Nylon Thermoplastic
색상: 검은색
△액츄에이터:UL 94V-0 LCP Thermoplastic
색상: 흰색
△CONTACT: 구리합금
△터미널: Brass
△CONTACT PLATING:금도금한 니켈
△TERMINAL PLATING: 금도금
△테이프: KAPTON
솔더링 및 세척과정
Soldering:Vapor phase & Reflow soldering can be applied.
Cleaning:
1. Only seal tape type apply to washing process.
2. Do not remove the seal tape before washing.
3. After soldering process, do not continue the washing process immediately. Please wait for at least 3 minutes.
4. Apply alcoholic solvents as cleaning agent do not use other solvents or water.
5. Ultrasonic cleaning is unavailable.
6. The cleaning process per stage is 1 minute max and the whole cleaning times do not exceed 3 minutes.
7. Do not impose any external force on switch while washing
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
Mechanical Spec
Operation Force | 500gf max. |
---|---|
Stroke | 0.8mm |
Operation Temperature | -40℃ to +85℃ |
Storage Temperature | -40 to +8℃5℃ |
Electrical Spec
Electrical Life | 1,000 operations cycles per sw |
---|---|
Non-Switching Rating | 100mA, 50VDC |
Switching Rating | 25mA, 24VDC |
Contact Resistance | 100mΩ max. at initial |
Insulation Resistance | 100MΩ min. (at 100VDC) |
Dielectric Strength | 300VAC / minute |
Circuit | Single pole single throw. |
Drawing
- Dimension
- Soldering Temp.