딥 스위치
| 동양전기공업의 제품을 소개합니다.
다른이미지보기
제품 상세 정보 (Product Features)
*원자재
-베이스 & 커버 :
High-Temp Thermoplastic NYLON UL 94V-0
색상: 검은색
-액츄에이터: High-Temp Thermoplastic LCP
색상: 흰색
-터미널: 동, 금도금
-Contact: 구리합금을 금도금 함
-솔더링 과정 중의 세척안내
1. Only Tape sealed types apply to wash process.
2. Do not remove the tape before wash process.
3. After soldering process, do not continue the wash process immediately. Please wait for at least 3 minutes.
4. Apply alcoholic solvents as cleaning agent do not use other solvents or water.
5. Ultrasonic cleaning is not recommended.
6. The cleaning process per stage is max. 1 minute and the whole cleaning time are not to exceed 3 minutes.
7. Do not impose any external force on switch while washing.
-솔더링 과정 중 플럭스(Flux)가 유입 될 경우 스위치의 오작동이 발생할 수 있습니다.
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
-베이스 & 커버 :
High-Temp Thermoplastic NYLON UL 94V-0
색상: 검은색
-액츄에이터: High-Temp Thermoplastic LCP
색상: 흰색
-터미널: 동, 금도금
-Contact: 구리합금을 금도금 함
-솔더링 과정 중의 세척안내
1. Only Tape sealed types apply to wash process.
2. Do not remove the tape before wash process.
3. After soldering process, do not continue the wash process immediately. Please wait for at least 3 minutes.
4. Apply alcoholic solvents as cleaning agent do not use other solvents or water.
5. Ultrasonic cleaning is not recommended.
6. The cleaning process per stage is max. 1 minute and the whole cleaning time are not to exceed 3 minutes.
7. Do not impose any external force on switch while washing.
-솔더링 과정 중 플럭스(Flux)가 유입 될 경우 스위치의 오작동이 발생할 수 있습니다.
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
Mechanical Spec
Mechanical Life | 2,000 cycles |
---|---|
Operation Force | 800gf max. |
Operation Temperature Range | -20℃ to +85℃ |
Storage Temperature Range | -40℃ to +85℃ |
Electrical Spec
Electrical Life | 2,000 cycles. |
---|---|
Non-Switching Rating | 100Ma, 50VDC |
Switching Rating | 25mA, 24VDC |
Contact resistance | 100mΩ max. , at 500 VDC. |
Insulation Resistance | 100MΩ max, at 500 VDC. |
Dielectric Strength | 100VAC/1 minute |
Drawing
- Dimension
- Tube
- Soldering Temp.
- NPM DIMENSION