PRODUCTS

택트 스위치

| 동양전기공업의 제품을 소개합니다.

다른이미지보기

T3C 시리즈 - 3.0 x 2.0 Terminal SMT Type 택트스위치

상품코드 : 042500144

* Water Proof & Dust Free
* Low profile with 0.60mm
* Long operation cycles

  • 제품상세 PDF변환
  • 브랜드명 : DIPTRONICS
  • facebook
  • twitter
  • ROHS조건준수
  • 양산재고가능
  • 제품비교추가
  • 나만의 파트리스트 추가
  • 판매처 안내
  • 샘플, 견적요청 추가
  • 제품상세정보
  • 추가제품옵션
  • 관련제품
  • 추천적용분야
  • 상품문의
  • 자료다운로드

제품 상세 정보 (Product Features)

*추가제품옵션탭 에서 상세한 제품군을 찾을실 수 있습니다.

-Mechanical Spec
: Operation Force 160±50gf
: Travel: 0.13mm

-Environmental
: 작동온도 범위 -40도~+85도
보관온도 범위 -40도~+85도


-솔더링 과정 중의 세척안내
1. Only Tape sealed types apply to wash process.
2. Do not remove the tape before wash process.
3. After soldering process, do not continue the wash process immediately. Please wait for at least 3 minutes.
4. Apply alcoholic solvents as cleaning agent do not use other solvents or water.
5. Ultrasonic cleaning is not recommended.
6. The cleaning process per stage is max. 1 minute and the whole cleaning time are not to exceed 3 minutes.
7. Do not impose any external force on switch while washing.

-솔더링 과정 중 플럭스(Flux)가 유입 될 경우 스위치의 오작동이 발생할 수 있습니다.

※ 유의사항

상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.

Mechanical Spec

Operating Life300,000 cycles
Operation Force160±50gf
Operation Temperature Range-40°C to +85°C
Storage Temperature Range-40°C to +85°C

Electrical Spec

Travel0.13mm
Dielectric Strength100V AC/1 minute
Insulation Resistance100MΩ min. 100V DC
Contact Resistance500mΩ max.
Contact Rating10uA, 1V DC to 50mA, 12V DC

Drawing

T3C DIMENSION & PCB LAYOUT
T3C CIRCUIT