앵글/각도 센서 [Angle Sensor]
| 동양전기공업의 제품을 소개합니다.
다른이미지보기
제품 상세 정보 (Product Features)
・Conductive Plastic Angle Sensor
・Independent Linearity: ±2%
【원자재】
●하우징: 플라스틱
*사용시 주의사항
・To avoid burnout of resistive element, do not supply more than 1mA current to terminal 2.
・Miswiring might cause burnout of resistive element.
・To reduce sliding noise, add load resistance should be more than 100times and less than 1000times of total resistance.
・Slight continuous vibration such as dither might cause short lifetime of the sensor.
150m/s2 2000Hz 3 axis 2 hours each
500m/s2 11ms 6 directions 3 times
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
・Independent Linearity: ±2%
【원자재】
●하우징: 플라스틱
*사용시 주의사항
・To avoid burnout of resistive element, do not supply more than 1mA current to terminal 2.
・Miswiring might cause burnout of resistive element.
・To reduce sliding noise, add load resistance should be more than 100times and less than 1000times of total resistance.
・Slight continuous vibration such as dither might cause short lifetime of the sensor.
150m/s2 2000Hz 3 axis 2 hours each
500m/s2 11ms 6 directions 3 times
※ 유의사항
상기 제품에 첨부된 데이터시트는 참고용입니다.
자세한 데이터시트를 원하실 때에는 당사에 문의 바랍니다.
Mechanical Spec
Mechanical Angle | 360 Endless |
---|---|
Rotational Torque | 2mN-m max. |
Environmental Spec
Life Cycles | MIN. 10 Million |
---|---|
Operating Temperature Range | -30 ~ +100℃ |
Electrical Spec
Effective Electrical Travel | 340° +2 -3° |
---|---|
Total Resistance Value | 1, 2, 5, 10kΩ |
Independent Linearity | ±2% |
Output Smoothness | 0.1%Vin max. |
Drawing
- CP-2FL DIMENSION
Drawing
- Schematic
- Output Characteristics